Can You Use All 4 RAM Slots?

What happens if you put RAM in wrong slots?

If ram is in the wrong slot then it wont boot.

If you have two sticks of ram and two slots there is no such thing as a “wrong slot”..

Is 32GB of RAM worth it?

In general, yes. The only real reason an average user would need 32GB is for future proofing. As far as just simply gaming goes, 16GB is plenty, and really, you can get by just fine with 8GB. In a handful of gaming performance tests, Techspot found basically no difference between 8GB and 16GB in terms of framerate.

Is 4 sticks of RAM bad?

The four sticks will just run through two channels. If you want to overclock it might be harder to get a stable clock or the stable clock will be lower. Otherwise there is no performance disadvantage to populating all the slots.

Can you use two different brands of RAM?

As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. … Different brands of Ram are fine to use together.

Is it better to have one 16GB RAM or two 8GB?

So if you have more than one physical ram slot per processor ram channel, you are better off with the two sticks of 8GB. But the difference is small enough that if the 16GB stick costs less, you may want to buy it instead.

Can you put ram in all 4 slots?

it can work but the safest and most stable RAM setup is to have all 8GB or all 4GB to fill up the slots. also having the same RAM brand and speed helps to make it stable. having the 4 8 4 8 RAM setup will probably work but not recommended by RAM manufacturers or motherboard manufacturers.

Is 4 RAM slots better than 2?

General rule with Ryzen is always to prefer 2 sticks over 4. If you want 32GB get 2x16GB. 2x8GB will have better timings/speeds though. the more physical chips on the dimm, the denser the routing and the worse signal integrity you get.

Does it matter what RAM slots you use?

Regardless, you still need to make sure you install your RAM into the right slot(s), otherwise it won’t work as well as it should do. The DIMM slots for your RAM are usually right next to your CPU. … Now, logic would suggest that those with two sticks of RAM to install should put them in slots 1 and 3.

Can I add 8GB RAM to 4GB?

That’s why it’s best to use the same model in all slots. However, this doesn’t mean you can’t use different size RAM sticks together. For example, if your first stick is 4GB, you can still add a new 8GB stick. … Your RAM sticks will work together at the frequency of the lower stick, by default.

Is it better to have more sticks of RAM or less?

It is of course much better for performance to populate all memory channels. That is, it is better to use many smaller size RAM sticks to populate all channels than just a single or two large size sticks inserted into 1 or 2 memory channels.

How do I know if my RAM slot is bad?

The only way to check your motherboard’s memory slots is to place a working RAM stick into each one and see if your machine boots properly. Remove all RAM sticks and place one you know is functional into the first slot on your motherboard.

Does RAM have to be in first slot?

The manual recommends putting ram in slot 1 & 3 first then 2 & 4. The evo will block the first slot a little. If you need to just use slot 2 &4. Should be fine.

Is 32GB RAM overkill?

32GB, on the other hand, is overkill for most enthusiasts today, outside of people who are editing RAW photos or high-res video (or other similarly memory-intensive tasks).

Is it bad to fill all RAM slots?

It depends on your system. If it supports dual channel memory only, there is no advantage to installing more than 2 modules. If it supports 4 channel memory, installation 4 modules will perform better.

Where do I put the ram in 4 slots?

In the case of a motherboard with four RAM slots, it’s probable you’ll want to install your first RAM stick into the slot labeled 1. A second stick should go into Slot 2, which isn’t next to Slot 1. If you have a third stick, it would go into Slot 3, which will actually be between Slot 1 and Slot 2.